How To Clean Your Water Dispenser

How To Clean Your Water Dispenser

According to the US Department of Energy, homeowners and offices should clean their water dispensers every six weeks or every time the water dispenser cap is replaced with a new one. Luckily, all it takes to clean your water dispenser is just some water, vinegar or bleach, and some few minutes. But you want to make sure you’re doing it the right way. That is exactly why I have explained the step-by-step process of how to clean your water dispenser below. On the side, if you’re looking to replace your water dispenser, get the best water dispenser here.

So, let’s get to work.

Prepare The Solution

The first thing you want to do is prepare the washing solution. Start this by getting a bucket with a comfy handle. Pour a gallon of clean water into it. And finally, introduce your vinegar solution or bleach or whatever solution you intend using into it. Avoid spilling the solution on your clothes or the floor. Proceed to add 1 tablespoon of bleach to the solution and mix gently with gloved hands. After that, take another bucket of one gallon of clean water and add 5-⅓ cups of vinegar. It’s advisable to add 2 tablespoons of lemon juice into the vinegar solution, especially if you’re allergic to vinegar. Finally, prepare another gallon of clean water in another bucket.

Putting Safety Measures In Place

The last thing you want to happen is experiencing electric shocks. Yes, crazy things happen that you can avoid. First off, unplug your water cooler from the power outlet using dry hands. Switch off the power outlet itself and make sure nothing is connected to it. Done that? Great. Now, ensure the power outlet is kept moist-free as possible as you can. Proceed to the next stage explained below.

Getting To Work

Take a clean sponge and dip it inside your prepared cleaning solution from stage 1. Use the wet sponge to clean the inner part of the water dispenser carefully and thoroughly. Reach for every corner and pay attention to lookout for mildew or mold growth. If you spot any, spend more time scrubbing until that surface feels squeaky clean when you press and slide 3 fingers against it. Go ahead and drain the solution away from the water dispenser through either the cold or the hot tap. Once drained, introduce water into the cooler 4 times to wash away the solution completely by washing 4 times. After that, lift up both the screen and the tray for proper rinsing. Dry them before returning the two to the dispenser. Take the new water bottle to clean its body dry to stop letting the water on its body from creeping into the water dispenser.

The Final Work

Rounding up, remove the cap to place your new cleaned bottle onto the water dispenser top. You want to make sure there’s an air-tight connection between the two. Right? If you notice the rice of water bubbles from the inside to the bottom-top of the water bottle, then you’re good. Otherwise, you still have to make the proper adjustment.

Use the comment box below if you have any questions.

Leave a Comment